PA46日本DSMTW441

Physical Properties Metric Comments Density  1.18 g/cc ISO 1183 Moisture Absorption  3.70% Humidity; Sim. ISO 62 Linear Mold Shrinkage, Flow  0.020 cm/cm ISO 294-4 Linear Mold Shrinkage, Transverse  0.020 cm/cm ISO 294-4 Mechanical Properties Metric Comments Tensile Strength, Yield  100 MPa ISO 527-1/-2 30.0 MPa ISO 527-1/-2 @Temperature 200 °C 35.0 MPa ISO 527-1/-2 @Temperature 180 °C 40.0 MPa ISO 527-1/-2 @Temperature 160 °C 50.0 MPa ISO 527-1/-2 @Temperature 120 °C Elongation at Break  40% Nominal; ISO 527-1/-2 >= 50 % Nominal; ISO 527-1/-2 @Temperature 120 °C >= 50 % Nominal; ISO 527-1/-2 @Temperature 160 °C >= 50 % Nominal; ISO 527-1/-2 @Temperature 180 °C >= 50 % Nominal; ISO 527-1/-2 @Temperature 200 °C Tensile Modulus  3.30 GPa ISO 527-1/-2 0.500 GPa ISO 527-1/-2 @Temperature 200 °C 0.600 GPa ISO 527-1/-2 @Temperature 180 °C 0.650 GPa ISO 527-1/-2 @Temperature 160 °C 0.800 GPa ISO 527-1/-2 @Temperature 120 °C Flexural Modulus  3.00 GPa ISO 178 0.600 GPa ISO 178 @Temperature 160 °C 0.800 GPa ISO 178 @Temperature 120 °C Izod Impact, Notched (ISO)  10.0 kJ/m² ISO 180/1A @Temperature 23.0 °C Charpy Impact Unnotched   NB ISO 179/1eU @Temperature 23.0 °C NB ISO 179/1eU @Temperature -30.0 °C Charpy Impact, Notched  1.20 J/cm² ISO 179/1eA @Temperature 23.0 °C Electrical Properties Metric Comments Volume Resistivity  1.00e+13 ohm-cm IEC 60093 Dielectric Strength  25.0 kV/mm IEC 60243-1 Comparative Tracking Index  400 V IEC 60112 Thermal Properties Metric Comments CTE, linear, Parallel to Flow  85.0 µm/m-°C ISO 11359-1/-2 CTE, linear, Transverse to Flow  110 µm/m-°C ISO 11359-1/-2 Melting Point  295 °C 10°C/min; ISO 11357-1/-3 Deflection Temperature at 1.8 MPa (264 psi)  190 °C ISO 72-1/-2 CTE, linear, Parallel to Flow  85.0 µm/m-°C CTE, linear, Transverse to Flow  110 µm/m-°C Melting Point  295 °C Deflection Temperature at 1.8 MPa (264 psi)  190 °C