联系人：王经理
手 机：13662834186
电 话：0769-87190386
传 真：0769-87190386
Q Q：249911599
Stanyl® ForTii™ LED4U (NC1103Q)Polyamide 4T
Glass Fiber
DSM Engineering Plastics
Product Description:
Stanyl® ForTii™ LED4U (NC1103Q) is a Polyamide 4T (Nylon 4T) material filled with glass fiber.
|
General
|
|||
| Filler / Reinforcement | Glass Fiber | ||
| Physical | Nominal Value | Unit | Test Method |
| Density | 1.58 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 1 | % | |
| Flow | 1.8 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.7 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Modulus | 7500 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 65 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 0.9 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 173 | °C | ISO 75-2/A |
| Melting Temperature 3 | 325 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
| Drying Temperature | 100 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Rear Temperature | 320 to 330 | °C | |
| Middle Temperature | 325 to 335 | °C | |
| Front Temperature | 330 to 335 | °C | |
| Nozzle Temperature | 330 to 335 | °C | |
| Processing (Melt) Temp | 330 to 340 | °C | |
| Mold Temperature | 100 to 150 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.500 to 3.00 | MPa | |
| Screw Compression Ratio | 2.5:1.0 | ||
